A finished pressure vessel resting on two steel supports in a dim fabrication bay.
Plate rolling to 75 mm, 80 t lift, U and U2 stamps. Budget price in 2 working days.
Milton
Monday to Friday, 6 am to 11 pm (two shifts)
Demo figures, updated weekly on a live site.
| Bay | W1 | W2 | W3 | W4 |
|---|---|---|---|---|
| Bay 1, heavy (80 t) | 20% | 35% | 55% | 70% |
| Bay 2, medium (20 t) | 40% | 45% | 60% | 65% |
| Bay 3, stainless (10 t) | 10% | 25% | 40% | 55% |
| W1 | W2 | W3 | W4 |
|---|---|---|---|
| 20% | 35% | 55% | 70% |
| W1 | W2 | W3 | W4 |
|---|---|---|---|
| 40% | 45% | 60% | 65% |
| W1 | W2 | W3 | W4 |
|---|---|---|---|
| 10% | 25% | 40% | 55% |
Enter the vessel’s size. You get an answer against our shop limits and a likely shipping route.
We can build this. An estimator will confirm one point.
Governing limit
Post-weld heat treatment
Needs post-weld heat treatment. We arrange it through our furnace partner.
Estimated weight, including 15% for heads and nozzles
45 t
| Check | This vessel | Shop limit | Result |
|---|---|---|---|
| Diameter | 3,000 mm | 4,800 mm | Fits |
| Length | 9,000 mm | 24,000 mm | Fits |
| Lift capacity | 45 t | 80 t | Fits |
| Rolling capacity at this diameter | 60 mm (2.4 in) | 75 mm (3 in) | Fits |
| Post-weld heat treatment | 60 mm (2.4 in) | Required above 38 mm (1.5 in) | Review |
Shipping
Oversize road load by permit
Needs a permit and likely escorts. We plan the route with the carrier.
Shipping routes are indicative. The carrier and permit office confirm the final route.
Added. Your vessel is in the quote request below.
Rolling, welding, testing and heat treatment under one roof, three bays, two shifts.
Cold rolling of heavy plate into shells and cones, plus cutting and bending.
Procedures qualified to ASME Section IX and CSA W47.1, from carbon steel to duplex.
Flange faces, nozzle bores and weld preps machined in-house.
Hydrostatic testing and surface NDE in-house; volumetric NDE by qualified partners.
Local PWHT in-house; furnace PWHT through a partner within 60 km.
Three bays sized for heavy, medium and stainless work.
Four sectors, each with its own codes and shipping problems.
Platework and pressure vessels for refurbishment and new-build programs, built to the codes the supply chain audits.
Tanks, chutes and vessels for mills, sized for road limits or shipped in segments.
Code-stamped separators, drums and columns, hydrotested before they leave the shop.
Stainless tanks, filters and pressure vessels for municipal and industrial treatment.
| Item | Detail |
|---|---|
| Scope | 36 rolled shell segments for three 9.1 m tanks |
| Material | SA-516-70, 25 mm |
| Shipping | Standard road loads, nested, for field assembly |
| Duration | 9 weeks |
Fictional project, shown to illustrate the format.
| Item | Detail |
|---|---|
| Size | 2,400 mm OD × 11 m, about 28 t each |
| Material | SA-516-70, 38 mm, impact tested |
| Stamp | U stamp, CSA B51 registered, hydrotested |
| Shipping | Two permit loads by road |
Fictional project, shown to illustrate the format.
| Item | Detail |
|---|---|
| Scope | Procedure qualification and a first-article shell course |
| Size | 3,000 mm OD × 3,050 mm long, 50 mm wall |
| Program | Built under the CSA N299.2 program being implemented |
| Inspection | Full RT, dimensional report, PMI |
Fictional project, shown to illustrate the format.
| Item | Detail |
|---|---|
| Size | 2,400 mm OD × 4.2 m, about 4 t each |
| Material | SA-240 316L, 12 mm |
| Stamp | U stamp, CSA B51 registered, hydrotested |
| Finish and shipping | Pickled and passivated by our partner; six standard road loads |
Fictional project, shown to illustrate the format.
Nine documents your supplier onboarding usually asks for. In this demo, each is a sample marked as fictional.
Five open roles, including two apprenticeships.
FCAW and SAW on carbon steel; flat and horizontal tickets required.
Reads fabrication drawings; fits shells, heads and nozzles.
CWB welding inspector, Level 2 or higher.
Prices pressure vessels and platework from drawings and datasheets.
Paid training toward a CWB ticket. Two positions.
Application received. Demo only: nothing was sent.
An estimator reads every request. Budget price in 2 working days, firm quote in 5.
Reference
This is a demo. Nothing left this page; on a live site the request lands in the shop’s inbox.
